iprog+ problem

[killerghost]

i have problem with new iprog i can't connect to all adapter (power over load + adapter not found)

Çàïóñê òåñòà
---  Òåñò VCC = 3V  ---
ADC0 (êîíòàêò 41) = 0.0 V. ÍÅÈÑÏÐÀÂÍÎÑÒÜ.
---  Òåñò VCC = 5V  ---
ADC0 (êîíòàêò 41) = 0.0 V. ÍÅÈÑÏÐÀÂÍÎÑÒÜ.
---  Òåñò 10/12V  ---
Uâûõ = 10V
ADC2 (êîíòàêò 43) = 0.0 V. ÍÅÈÑÏÐÀÂÍÎÑÒÜ.
ADC3 (êîíòàêò 44) = 0.0 V. ÍÅÈÑÏÐÀÂÍÎÑÒÜ.
Uâûõ = 12V
ADC2 (êîíòàêò 43) = 0.0 V. ÍÅÈÑÏÐÀÂÍÎÑÒÜ.
ADC3 (êîíòàêò 44) = 0.0 V. ÍÅÈÑÏÐÀÂÍÎÑÒÜ.
---  Òåñò âíåøíåãî ïèòàíèÿ  ---
ÍÅÈÑÏÐÀÂÍÎÑÒÜ - ÂÍÅØÍÅÅ ÏÈÒÀÍÈÅ ÍÅ ÏÎÄÊËÞ×ÅÍÎ. 
---  Òåñò âûâîäîâ  ---
PORTD.1 (âûâîä 6): ÍÅÈÑÏÐÀÂÍÎÑÒÜ
PORTE.0 (âûâîä 7): OK.
PORTE.1 (âûâîä 8): OK.
PORTE.2 (âûâîä 9): OK.
PORTE.3 (âûâîä 10): OK.
PORTE.4 (âûâîä 23): OK.
PORTE.5 (âûâîä 24): OK.
PORTE.6 (âûâîä 25): OK.
PORTE.7 (âûâîä 27): OK.
PORTD.6 (âûâîä 5): ÍÅÈÑÏÐÀÂÍÎÑÒÜ
PORTA.0 (âûâîä 20): OK.
PORTA.1 (âûâîä 21): OK.
PORTA.2 (âûâîä 22): OK.
PORTB.0 (âûâîä 19): ÍÅÈÑÏÐÀÂÍÎÑÒÜ.
PORTB.3 (âûâîä 18): ÍÅÈÑÏÐÀÂÍÎÑÒÜ.
PORTA.5 (âûâîä 2): ÍÅÈÑÏÐÀÂÍÎÑÒÜ.
PORTA.6 (âûâîä 17): ok
PORTA.7 (âûâîä 1): ÍÅÈÑÏÐÀÂÍÎÑÒÜ
PORTB.4 (âûâîä 16): ÍÅÈÑÏÐÀÂÍÎÑÒÜ
PORTB.6 (âûâîä 4): ÍÅÈÑÏÐÀÂÍÎÑÒÜ
PORTB.5 (âûâîä 3): ÍÅÈÑÏÐÀÂÍÎÑÒÜ
------------------------------
 Òåñò çàâåðøåí. Îøèáîê: 16
 

[Cardiag]

ASK YOUR CHINESE CLONE SELLER!!! 

Here is support forum for OFFICIAL IprogPro. We not support CLONES!!!

[Jay N]

hai i have problem with iprog+ for repair footwell mini R56.. 

Iprog+ not have 9s12xeq384 script ..

pls help me .. how...

 

[Cardiag]

7 часов назад, Jay N сказал:

hai i have problem with iprog+ for repair footwell mini R56.. 

Iprog+ not have 9s12xeq384 script ..

pls help me .. how...

 

ASK YOUR CHINESE CLONE SELLER!!! 

Here is support forum for OFFICIAL IprogPro. We not support CLONES!!!

[Joose20072]

Buenas noches, antes de preguntar algo quisiera saber si mi programador es original. Como puedo saberlo?. Yo entre en un tutorial y creo que si es original.